Wire Enclosures Panel - 8'H x 1'W - Wireway - Husky Corp
Item #: C23E801
Manufacturer: Wireway / Husky Corp
Manufacturer Item #: 2-W0104
All versions of Wire Enclosures Panels - Wireway - Husky Corp:
| Item# | Height/ft. | Width/in. |
|---|---|---|
| C23E801 | 8 | 1 |
| C23E802 | 8 | 2 |
| C23E803 | 8 | 3 |
| C23E804 | 8 | 4 |
| C23E805 | 8 | 5 |
| C23E806 | 8 | 6 |
| C23E807 | 8 | 7 |
| C23E808 | 8 | 8 |
| C23E809 | 8 | 9 |
| C23E810 | 8 | 10 |
| C23E1001 | 10 | 1 |
| C23E1002 | 10 | 2 |
| C23E1003 | 10 | 3 |
| C23E1004 | 10 | 4 |
| C23E1005 | 10 | 5 |
| C23E1006 | 10 | 6 |
| C23E1007 | 10 | 7 |
| C23E1008 | 10 | 8 |
| C23E1009 | 10 | 9 |
| C23E1010 | 10 | 10 |
|
|
|
|
|
|
|
|
This wire enclosure panel features hook fasteners that slip into 2-1/2" sq. 14-ga. tube posts. Each is made of two panels stacked together to form partition height. Aluminum drive pins are tapped into place above hook for permanent installation. Hook fasteners and drive pins are not visible or accessible from the outside and both sides have a smooth finish. Panels stack horizontally to create the height you require. 2-1/2" posts are used after every panel, at every corner, and on both sides of door. Wire mesh is made of 10-ga. steel with 1-1/2" diamond wire weave. All panels are shipped fully crated with 1/2" x 3" masonry anchors to fasten to floor.
